• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How Does Machine Espresso Work?

The machine espresso uses precise pressure, as well as a filter technology that is mind-blowing to create the coffee you enjoy. How exactly does it work?

Espresso is created by forcing hot water at high pressure through finely-ground coffee. The process is similar to making drip coffee, but the major difference is in the pressure.

The Group Head

The group head is the portafilter that you put in when making espresso. It distributes water into the portafilter and controls the pressure of the extraction. There are various kinds of group heads each with its particular advantages and drawbacks. Some are focused on temperature stability, best espresso machine small espresso machine (https://plantsg.com.Sg:443/bbs/Board.php?bo_table=Mainboard&wr_id=8015378) some on pre-infusion capabilities, and still others are designed to control the lever. There are also some that come with a range of features, such as the E61, which is considered the most popular choice among baristas due to its capacity to offer multiple benefits in one package.

As you can see in the above photo the group head is made up of numerous notches that you can put your portafilter, then twist it by hand to secure it. There is also a gasket of rubber that resides inside the notches and helps create the seal when you insert your portafilter into the machine. The notches on the head allow for a precise location of the portafilter which is essential to ensure a consistent extraction.

The group head does not just allow you to place your portafilter easily but also maintains an even temperature. It does this by cycling hot water through the brew pan and around the portafilter to ensure that it is always at the correct temperature for extraction. It is important to note that even a tiny differences can make the distinction between a good and a excellent espresso.

The Pump

The motorized pumps used in espresso machines rotary provide nine atmospheric bar pressure that is required for espresso coffee machines extraction. This differs from manual piston machines which use levers. This pressure builds up by removing tap water from a reservoir, and pumping it through a heat exchanger before being shot through the ground coffee inside the group head.

Pumps tend to be cheaper than piston-driven machines, and they tend to last longer. However, both types of machines can get damaged through overuse and lack of cleaning. Pumps are also more complex mechanically, which could increase prices of even simple models.

Certain espresso machines do away with the pump completely and instead use steam pressure to brew espresso. This could lead to over-extraction since the boiler that produces steam also heats the water to boil. The machines also need to continuously rebuild their pressure between cups. This requires energy and time.

Many espresso machines utilize the rotary or vibration pump, with a vibrating model that uses a vibrating disc that generates the pressure and rotating models that push hot water through the grounds under high speed. Both machines can make great espresso however rotary machines tend to be more quiet, durable and less likely to break down.

The Boiler

The boiler is the part that heats the water to the optimal temperature to extract. The resultant steam then reaches the portafilter that contains ground espresso beans and gets funnelled down into the cup. The steam causes pressure to push through the coffee grounds. This produces a layer of crema that is then poured over. This is a sign of a good espresso.

There are three distinct types of espresso machines, each having different types of pumps and brew temperature. There are various ways that the brew can be controlled as well as the size of the cup the machine is capable of making.

The earliest espresso machines were steam-based. The earliest espresso machines were steam types. This led to the coffee tasting burnt and bitter. This is why Milanese manufacturers Luigi Bezzerra and Desiderio Pavoni developed the modern espresso machine.

The most commonly used espresso maker is a semi-automatic machine that has an electric pump. When people think of espresso machines, they envision these machines. If you have a semi-automatic machine you need to grind the beans and then tamp them by hand. The pump provides regulated water flow and pressure. This is an excellent compromise between human touch and mechanized consistency.

The Filter

Typically, Espresso Maker For Home machines utilize filters that separate the grounds of the coffee as they go through the hot water. The filter is also an essential element of the temperature control system because it stops the machine from overheating.

It also improves flavor, as a filter can allow for a longer bloom phase. This allows beans to release their nuances and gives an opportunity for a better extraction.

It is important to remember that even the best filter can produce a bad cup of coffee. The quality of the beans, and the extraction process remain vital.

This is where the magic happens, it's what makes espresso taste good. The grouphead, also called the brewhead, is where the portafilter (the thing you put the ground coffee into) is located when you're making espresso.

In the steam-driven espresso machine hot water is heated in an airtight tank to create steam. Steam then pushes the hot water through the grounds at a high pressure. They are less expensive and easier to maintain than pumps-driven models. They are however limited to create the perfect conditions for brewing since they only operate with 1-1.5 bar of pressure. The perfect shot requires 9-10 bars.

In recent years, espresso machines powered by compressed air-pump have become increasingly popular. They utilize an air compressor to force hot water through the grounds and are significantly more portable than electric steam-driven machines.