• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the Saab 9-3

saab ignition key owners have a distinct set of steps to take to add another key. It requires dealer assistance using a handheld computer dubbed Tech-2. A new key and transponder need to be bought and programmed to the car.

It is a good idea to rotate your keys so that one does not get worn out more quickly than the other. This will also ensure that your keys remain in top condition.

Replacement Case

Unlike the classic Saab keys of the past keys, the modern key fobs have electronics inside that make it difficult to make a copy. That has made car theft a lot more difficult than it was twenty years ago. However, it also has made replacing lost keys a more expensive endeavor.

Saab 9-3 owners must have two keys working. If one gets lost, it costs a lot to add another to the car, as it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100-$200 to do this.

There are ways to avoid these high costs. Some parts dealers will look up the code from a spare key (usually the same one that opens the doors and switches the ignition) and cut a new metal key blade for just a fraction of dealer cost. The key must, however, be the same as the original one in order to function within your car.

Follow these steps to replace the case. You'll require an open-faced screwdriver and patience. With the screwdriver, you can pry away the plastic and take out the emergency key. Once the case is opened, take out the electronics and put them back into your new case. Be sure to put the correct badge and key back in the case too.

Replacement Battery

The replacement battery for the saab key battery replacement 9-3 is a cheap component that can be replaced easily and quickly. Cyclone's YouTube video Cyd demonstrates how to replace the remote fob battery in just four steps. This guide should work with any modern saab spare key key (Suggested Browsing) fob, though the process may vary slightly.

The first step is to locate the button that releases the backup key on the fob. It's usually close to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver through the small hole in this button. This should be enough to open the fob's case to allow you to replace the battery.

After you have installed the new batteries CR1632, you can put back together the remote key fob. Then, you can program it into your car. The whole process should not take more than one hour. It's a very easy process that does not require any special tools.

The process is a bit more complicated if you've lost your key, but it is possible. The dealer will need to read the car's VIN and then order a new key blade and TWICE module with the correct unique code. Then, they'll need to cut the replacement key and then program it with the latest software tool known as MDI.

Key Replacement Fob

The key fob has a battery that is used to lock and unlock your car. The batteries are able to last for, and they will eventually go out of service. It is a common problem that affects all cars. The good news is you can replace the battery on most key fobs, without having to replace the entire case. You can purchase fobs replacements on Amazon that have all the electronics already installed, so you can simply open the case and replace those batteries that are old. It's important to note that you'll have to take out the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot located in the middle of the case. Work the screwdriver around the case until it will split open, making it much easier to take it out.

When you are ready to replace the keys, make sure you have a spare, because this can cut down your total cost by a substantial amount. If you have a spare, you can ask the dealer to cut a new key and program it to your car, which is cheaper than replacing the whole key fob.

If you do not have a spare key you can add a second key to your car, but this will require a lot of research and effort. It costs around a hundred bucks to add a second car key. The computer of the vehicle also has to be programmed. This can be accomplished by a professional, however it's a costly choice for most owners.

Replacement Ignition

As opposed to the earlier Saab automobiles, the new saab car key 9-3 models feature an advanced alarm system that is built on a key code. This means that if you lose your only working key, adding another key can be extremely expensive because the car needs to have a unique computer module added and it also needs to be specifically designed to accept a different key. Locksmiths typically aren't able to program this, and even dealers can charge several hundred dollars to program the new key!

If you've lost your only working key, a dealer will repair the computer in your car (known as the CIM or SAAB TWICE) to create the replacement, and will charge top dollar for it. We can reprogram the EEPROM on your car's computer to make it ready for an extra key. This will save you more than 50% on the cost you have to pay a dealer.

If you've owned a 9-3 from saab key replacement near me for quite a while you are aware that the ignition keys are not very durable. If the ignition key you have isn't functioning properly, you must think about replacing it. They can become very sticky and the buttons can fall off. It's not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be accomplished in a short time.