• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Wood Burning Stoves Near Me

Wood stoves are a carbon-free renewable heat source that can reduce energy costs. They also support active woodland management, which benefits wildlife.

If they aren't installed and maintained correctly they may release carbon monoxide, which can pose health hazards to the entire family. To avoid this, select an appliance made of wood that is EPA certified and has modern technology to ensure safe operation.

Catalytic Stoves

A catalytic fireplace is outfitted with a specific catalyst which looks like honeycomb. It converts wood smoke into carbon dioxide. This is a fantastic option for those looking to reduce indoor air pollution and save money. They use less fuel, burn faster and produce less creosote. They can be more costly to operate than non catalytic models, and require regular maintenance of the combustion chamber.

Wood Stoves Certified by the EPA

The EPA requires that wood stoves are designed in accordance with certain guidelines that restrict their emissions. These guidelines dictate that the catalytic stove must test at least 7.5 grams of smoke per hour. This compares to 4.1 grams per hour for a non-catalytic stove. However, 913875 it's important to remember that lower emissions ratings don't translate into more heating efficiency.

Sizing and Selection

It is important that your wood stove is built appropriately for the space in which it will be installed. A stove that isn't properly sized will not function as it was intended and could even overheat. A properly sized stove will increase the heat output while decreasing emissions. The brochure buying an EPA-certified Wood Stove (PDF 530K) offers a simple method of sizing and choosing a new wood stove.

Non-Catalytic and Catalytic stoves

The first wood stove that was made was an uncatalytic stove. These are also known as traditional wood burning stoves or open-fire stoves. The primary advantage of the non-catalytic stove is that it doesn't require a secondary combustion to reduce emissions. Smoke is a major source of energy wasted. The smoke that is produced by wood stoves that are not catalytic contain creosote, a hefty residue which is a very toxic substance. The introduction of the catalytic wood stove has eliminated the risk of these issues. The catalytic wood stove employs catalysts to burn off the gases in the smoke and eliminates toxic creosote.

The catalytic wood burning device was created to minimize toxic emissions. However it's less efficient than the secondary combustion system utilized in the non-catalytic model. The catalyst produces unhealthy fumes because it doesn't burn completely the byproducts from burning wood. In addition the honeycomb structure the catalyst could degrade over time. This could lead to lower performance and the necessity for replacement.

Maintaining the Combustion Chamber Clean

A functioning catalytic combustor will have a light gray powdery appearance. It should be free of soot, ash or 913875 (Www.913875.Xyz) any other material that could plug up the catalytic surfaces, and reduce their surface area. The combustor must not be exposed to flame impingement. This can result from a fast, powerful draft pulling flames directly into the catalytic converter. This can also happen if you leave the firebox or ash pan doors open.

It is essential to check the catalytic combustion chamber on a regular basis for physical damage or 913875.xyz the need to replace. If it is damaged or requires replacement, it should be replaced as soon as possible to ensure best performance.