• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique procedure to add another key. It requires dealer assistance using the handheld computer known as Tech-2. Then a new key as well as transponder are required to be purchased and then programmed to the car.

Change your keys regularly to prevent one from wearing out quicker than the next. This will also help keep your keys in good condition.

Replacement Case

Contrary to the classic Saab keys of old keys, the latest keys have electronic components which makes it more difficult to make a copy. This has made stealing car keys much more difficult than twenty years ago. However, it has made the replacement of lost keys a more expensive endeavor.

Every owner of a Saab 9-3 must have at a minimum two functioning keys. It is costly to replace a lost or damaged key since it requires replacing the CIM module, as well as changing the locking cylinders. Dealers typically charge between $100 and $200 for this.

There are ways to reduce the high price. Some parts providers will use the code of an old key to cut a new metal blade for less than the price of the dealer. The key, however, must be the same as the original to work correctly within your car.

Follow these steps to replace the case. You'll need an open-faced screwdriver and a lot of patience. Utilizing the screwdriver, slowly tear the plastic away and separate the emergency keys from the case. Once you have the case opened, take out the electronics and put them in the new case. Insert the correct key and badge into the case.

Replacement Battery

The replacement battery for the saab key programming near me 9-3 is an affordable component that can be replaced easily and quickly. This YouTube DIY video Cyclone Cyd will show you how to get a saab replacement key to replace the battery of the remote key fob in only four steps. This tutorial can be used for any modern saab key fob although the process might differ slightly.

The first step is to locate the button that will release the backup key in the fob. This button is typically located on the back of the fob next to the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the tiny hole in this button. This should be enough to allow you to open the fob case so that you can replace the battery.

Once you have installed the new battery CR1632, you are able to rebuild your remote key fob. Then, you can program it into your car. The procedure should take no more than a half hour at the most. It's a very easy process that does not require any special equipment.

The process is more complicated in the event that you lose your key, but it's possible. The dealer has to read the car's VIN and then order a new key blade and TWICE module, both with the exact unique code. After that, they will need to cut the replacement key and then program it with a brand new tool for programming called MDI.

Key Replacement Fob

The key fob has an internal battery that is used to lock and unlock your car. The batteries last for a period of and eventually go out of service. This is a frequent issue in all vehicles. The good thing is that you can replace the battery in all key fobs, and not have to replace the entire case. Amazon sells fobs for replacement that already have all the electronic components installed. You can simply remove the case and replace the batteries. It is important to note that you'll need to remove the emergency key first, and you can do this by inserting a small flathead screwdriver into the slot that is located in the middle of the case. The case will split as you turn the screwdriver around it.

If you're planning to replace your keys, keep a spare in your possession. This will save you a significant amount of money. If you have a spare, you can have the dealer cut an additional key and program it to the car, which is cheaper than replacing the whole key fob.

It is possible to add a second key to your vehicle in the event that you don't have one, but it requires lots of research and work. Adding a second key costs around a hundred dollars and it requires programming of the car's computer. Professionals can accomplish this however, it's a costly option.

Replacement Ignition

The current saab 9-3 key replacement (head to the Telegra site) 9-3 uses an alarm system that is more sophisticated built around a key code. This means that in the event that you lose your only working key, replacing it with another key can be extremely costly since the car needs to have a special computer module fitted and also needs to be specifically programmed to accept an additional key. Most locksmiths can't do this and dealers will charge hundred dollars just to program the new key!

If you've lost saab keys your sole working key the dealer will replace your car's computer (known as the CIM or SAAB TWICE) to make an exchange, and they will charge you the highest price for it. Instead we can reprogramme the EEPROM on your existing car computer to prepare it for an additional key, and save you over 50% of the amount you be charged at a dealership.

If you've owned a 9-3 from SAAB for an extended period of time you're aware that the ignition keys are not very durable. They can get extremely sticky, and the buttons are known to be ripped off from time to time It is recommended that you consider buying a new one if the one you have isn't functioning properly. It's not so difficult as it may seem to replace the ignition key. With the right tools, it can be accomplished quickly.