• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Double Glazing Door Lock repairs to double glazing windows

Has your uPVC window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to operate.

It is essential that your double-glazed doors operate smoothly, otherwise you'll lose energy and increase the chance of burglary. Owen the Locksmith will be able to fix your door lock at a reasonable cost.

Snapped Key

If a key breaks within a lock, it can be incredibly difficult. This can also be a security problem because it could make you vulnerable to burglars if your door is not locked. There are fortunately simple fixes you can try to resolve the problem and get your door functioning correctly.

Be calm. If you get scared and start doing a lot of fumbling around, you might just end up pushing the damaged piece of the key even further into the lock, which could make the situation even more difficult.

Spray WD-40, or another penetrating oil, into the lock. This will assist the broken piece to emerge more easily. You can also make use of a screwdriver to break up any pieces stuck that might be blocking the way. If you're fortunate enough to have a bit of the key that is sticking out, you can make use of a paperclip, or any other thin metal object to grab it and pull it out. Both methods are effective, but you need to be careful not to push the broken key piece further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of these then you can bend a hook with needle-nosed pliers. You can also use a pair of tweezers grab and pull out the remaining pieces of broken keys.

If you cannot remove the broken key piece, use a lock deicer. It's available in many hardware stores and is used to freeze any moisture that may be present inside the lock.

If none of these strategies seem to be helping you, it's time to call in a locksmith. Fitlocks specialists are able to quickly fix problems with uPVC door locks and mechanisms such as snapped keys and broken handles. They can also reconfigure the Double Glazed repairs glazing door mechanisms so that they are easier to use. Request a repair for your double glazing through us online, or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder is an immediate security risk. Luckily, it's an easy repair for an expert locksmith to complete. Locksmiths will need to tap the cylinder in order to fix it. They can do this with the hammer or any other tool, but the best way is to make use of a long match or piece of wire. Position the match or the wire's end in the keyway. After that, the locksmith will hit the lock to break it open. This is much safer than using a hammer that can cause damage to the lock.

The most common cause of cracks in the cylinder head is overheating. This can happen when the block and the cylinder head are made of various metals, such as cast-iron or aluminum. When the different metals are heated and cool at different rates, it may create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Another possible cause of cracks in cylinders is corrosion. If the cylinder block and head are not maintained in a timely manner, they can rust or corrode, which can cause them to expand more than they would normally. This can lead to cracks as time passes.

If your uPVC door or window lock is stiff or requires a lot of pressure to turn, it can be the result of several things. This problem can be caused by a faulty locking mechanism or misalignment or a worn-out handle.

This is a simple and inexpensive fix that most double glazing owners can accomplish. A professional locksmith can usually solve the issue within one hour of arriving at your home. Based on your requirements they can change the locking mechanism, replace the window handles, or change the gearboxes. A skilled locksmith will always be able to provide you with a recommendation on the most cost-effective solutions for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders, which give you an extra security layer from burglars. It's a small price to enjoy the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

Window handle locks have complex mechanisms that become less effective as time passes and use, so it's not a surprise they occasionally break. It isn't easy to determine the cause of the broken window handle lock and repair double glazing window it correctly.

repairing double glazing your damaged handle, whether it's the internal latch or locking mechanism will increase the security of your uPVC door and stop draughts. If you do not repair double glazed windows or replace your handle can be expensive and could cause damage to the door's frame and lock It is therefore worth taking the time to do it correctly.

With the window open and the window open, loosen the screw that secures the handle by using a screwdriver. This should be located on the inside of the back plate, which is usually hidden by an aesthetically pleasing cover for the screw reasons. Be careful not to lose any of the internal components inside the handle, such as the plates or levers that are on the opposite side of the spindle. Ideally, keep these in the same order so you can replace them if needed.

Then, rotate the handle until it's 90 degrees towards the window frame. Then, loosen the screw on the back of the handle which holds it to the internal spindle with another screwdriver. Once the screw is loose, you can take the handle off and take the broken spindle out. Replace it with a new spindle, ensuring it's the same length (you can find them online or in hardware stores). Screw it into the frame. Don't over tighten the screw as this could harm the handle as well as the window frame.

Close the handle and try it. It should operate smoothly, and you will be able to open your window once again.

While you're working on the handle, don't forget to make sure your uPVC windows are shut correctly. If they don't, you could experience damp and draughts in your home as and also affecting the efficiency of your home's energy usage. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they are able to shut properly.

Broken Spindle

It is quite common that the spindle in the handle is broken, not the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that acts as an electronic locking mechanism within the window frame. The handle is attached to a central rod which triggers a set of mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism fails to open after the handle has been turned, it is most likely the spindle has been damaged. This could be a frustrating issue.

There are ways to fix this problem. A good locksmith can quickly and effectively fix the issue. A professional locksmith will be able to disassemble the handle of the window by using a tool that removes the wheel from the area in which the spindle is. This can be done without causing any damage to the handle or causing any other damage to the frame of the window.

Once the wheel is removed the technician can then examine the spindle to determine what caused it to break. This involves breaking down the spindle into its individual parts and meticulously noting their general condition, as in addition to any specific areas of damage or excessive wear. This process is usually performed by technicians in a clean and safe environment.

The next step is to clean the damaged spindle, this helps eliminate any dirt or other debris that could be hindering its normal functioning. The spindle can then be repaired or replaced. If it's being replaced, the technician could use a dowel of a similar size to the original and drill mating holes into both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.

If the damaged spindle can't be repaired, it might require replacement. Home centers can sell generic replacements however if your window style is rare, you will need to contact an expert in cabinet making or woodworking who can replicate the exact part. Once the new spindle is installed, it can be attached to the handle by line up the screw holes in the handle and the frame existing screws. Once the handle is firmly set, you are able to operate your uPVC windows.