• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing the Right Window Handle For Your UPVC Window

The right window handle is crucial for a properly installed uPVC. You'll require a style that is not only functional, but also complements the style of your home.

It is simple to change a uPVC handle. All you need are the tools listed below and a couple of minutes of your time.

Metal

Metal window handles can be both a decorative piece and an essential hardware item to improve the security of your home. There are a variety of window handle designs made of metal that can be adjusted to different frames and materials. Some handle designs are created specifically for sash window to make closing and opening the window easier and less likely to jam. If you're seeking a more secure option, there are several locking mechanisms designed to prevent the window from being opened beyond a certain amount.

The most commonly used type of window handle on UPVC is the epag handle. They have a spindle mental in the back, which is attached to the frame of the window and controls the window mechanism. They can be found on both UPVC and aluminium windows.

Cockspur handles are another common type of window handle, typically found on older UPVC windows. These handles can be more difficult than modern Espag handles because they use a traditional peg-locking mechanism.

For a sleeker look There are cam handles that are available. They have a sleek edge and are designed to be compatible with many other types of uPVC windows. They are ideal for tilt and turn windows, where you can open the window at the bottom while being able to open the top.

When selecting new metal window handles, it is essential to consider a number factors that include the step height and the direction in which the handle can be rotated. The distance between the underside and bottom of the screw plate is the first aspect to take into account. The second one is the direction in which the handle can be rotated. Some handles are able to rotate in one direction, such as clockwise. Other handles can only rotate in the opposite direction.

Plastic

There are a variety of window handles made of plastic. They all are designed to operate a window and secure it against unwanted intruders. They can be installed on either uPVC or aluminium windows, and come in a variety of styles and colors. Some are made with a euro lock handles that is built-in. This gives added security and lets you leave the window open while being secure from intruders.

Different situations can trigger window handle problems. Sometimes, they might not be able to rotate correctly. This could be due to dust getting into the mechanism and blocking it or causing dirt. A common problem is when the window handles for upvc handle starts to stick or walk tightly. This is a sign the window handle needs attention.

It is crucial to speak with an expert in the event of this. They can help you solve the problem quickly and effectively. They can also offer advice on replacing the plastic window handle with an alternative that is more efficient and more effectively.

Regardless of the type of handle you're using the majority of manufacturers make use of the same fasteners. This means it's simple to replace your window handle and lock with an exact match.

It's important to determine the size and style of your existing window before you begin looking for the replacement handle. This will help you find a handle that fits your windows perfectly and doesn't cause any issues. Note the spindle size - it's the distance the handle nose extends from the base. This is crucial when you are planning to utilize a window handle with restrictions.

Casement

Like awning windows and casement windows hinge on the top and bottom, but they open sideways to the left or right rather than opening vertically. They are easy to maintain, and they offer a stunning view of your backyard or garden. They also let in fresh air. They're a popular choice for new construction and also be a great addition to the architectural appeal of older homes. However, with time, they can become difficult to open or close because of worn hardware or stripped gears. In some cases window experts may have to replace the crank mechanism.

Casement windows or awning windows are typically fitted with a crank mechanism and roto gear to allow the window to shut and open. They also come with an locking mechanism that holds the sash firmly in place when closed. The lock on an window with an awning function is linked to the bezel locks to seal the window. Many people overtighten their casement window's operating handle. This could cause the locking mechanism to operate against one another, causing the window to not be able to open or shut properly.

Over time the handle on the window may also be stripped. This can occur if the window was closed and opened several times over a prolonged period of time. This could also happen when the window is used as a prop when it's open, causing its operating handle to rub against the crank shaft and gears.

Replacing a casement window or an awning window crank is a straightforward DIY window repair. It can save you money over the course of time. First, you'll need to locate the trim mounting screw that holds the casement cover (Photo 3). After removing the screws you can remove the handle that was previously used and examine the crank mechanism. Gears can be relubricated but if they are already damaged, you might have to replace them.

Cockspur

Cockspur handles are usually found on older uPVC windows, as well as aluminum and timber. They are simple to use, lock with the use of a key, and also provide an effective barrier against cold and noise from the outside. The handle opens up by pressing down on the lever and the cockspur nose closes over a wedge striker within the frame to seal the window on closing. By replacing both the handle and the cockspur wedge, you can improve the efficiency of double-glazed windows and security.

The replacement upvc window handles cockspur window handles are available in right and left hand models and operate by turning them 90 degrees. They come with tiny'spurs' that pushes against the PVC wedge on the window frame to create an extremely secure closure. These handles are easy to put in and come with a choice of finishes including black, white satin chrome, and PVD gold.

It can be difficult to measure the backset on a cockspur, especially if you are replacing a handle that was previously used. This handle has been designed to solve this problem and has three packers of various thicknesses that can be placed on the underside of the handle's nose to achieve a range of backset heights such as 9mm 13mm, 17mm, and 21mm.

The Schlosser Technik Apto is a top quality replacement cockspur handle which is suitable for a variety of applications ranging from 9mm to 21mm and comes with flexible screw fixing centres. It is also key locking, simple and easy to put in place, available in a range of finishes. It is available with left and right hand variants.

This handle is ideal for tilt and turn windows but it will not work with a side-opening casement window (these have the tilt and pivot separately). It can be used to replace older or damaged handles on uPVC or aluminium frames using rivets instead of screws, the only difference is the method of attachment. This handle can be affixed to your window frame using a rivet gun.

Espagnolette

The mechanism that locks your uPVC window is the espagnolette lock or shootbolt. These are typical in older homes and provide both aesthetics and security. Espagnolette handles are available with key-locking or non-key-locking mechanisms, and are available in both inline and crank designs. They can be straight or curving. The key-locking push button offers additional security by preventing the handle from being pulled open from the outside via a long thin screw driver snagged between the frames. This is a common method of burglary!

GB DIY Store offers a variety of door Handles victorian that are espagnolette. It is crucial to measure the size of the spindle on the handle you currently have before making a purchase for a replacement. Once you have done this, browse through our range of espag replacement handles to find the best design for your windows.

We have a large selection of white window handles uPVC espagnolette handles with key locking and non-key locking options. They come in various colours and spindle lengths to ensure you can match your new handles to your existing window frame and décor. Our espagnolette handles range includes modern and classic designs as well as contemporary styles. Each replacement handle comes equipped with five interchangeable magnetic spindle sizes ranging from 15mm and 55mm, so you can easily attach the handle to your windows without having to purchase the correct screw size!

A clever rose on the back of the rose ensures the spindle only fits in the right spot and is only inserted with the right-hand or left-hand lever, avoiding any mishaps. A spindle made of metal helps to hold the espagnolette handle in place, and the handle is held firmly in place by a clever 'click-fit' mechanism that is activated when the hand is turned to reveal an audible 'click'.