• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement Handles For Windows

Double-glazed windows are a very popular feature. They can wear down over time and be worn down or rusty.

You will need to know your current handle for double glazed window's length of the spindle and its fixings before you replace it. The best method to do this is to look at the base of your old handle.

Handle

Over time uPVC window locks and handles are susceptible to damage due to wear and tear or accidental or deliberate damage. This could result in the lock or handle becomes difficult to open or close, or it's not locked at all. If this happens it may be tempting to replace the entire window unit, but it's not always necessary. Most of the time, it's the case that a replacement handle or lock will suffice.

The most common type of uPVC window handle is the espagnolette. This handle has an external door handles euro lock spindle that is protruding from the handle. It is inserted into a gearbox which operates the multipoint locking system within the window. It is crucial to match the right door handle replacements and lock to your windows to ensure that they function correctly. That's why we carry a broad selection of replacement handles for all kinds of uPVC windows.

It is a good idea, when replacing a uPVC handle to cover the screws to protect the screws from corrosion and to keep them secure. You can also employ a washer, spacer or other sealant to ensure an even tighter fit. Having a screw cap in place will also prevent debris and water from entering the handle and causing damage.

Once the handle has been removed from the window it's recommended to wash the spindle of the new handle, and also the threaded section of the bolt. This will ensure that the new handle is fitted and functions properly, and it can also help prevent any dirt from entering the multipoint lock.

Next it's time to install the new uPVC handle. It is important to read the instructions that came with the new handle and take a look at the handle you had previously to get a better understanding of how it's done. The process is usually very easy. If you have any issues that aren't addressed in this guide, we suggest contacting our team to get more details.

It is important to note that if you're replacing an upvc door locks and handles Cockspur (also known as Espag handle) you'll require the height of the steps of your window to determine the correct size handle. The steps height refers to the distance from the frame or base of the window up to where the cockspur's nose handle is located when it is installed.

Hinges

The hinges may not be in line with the window frame when windows begin to close and open with a visible gap. This is usually an easy fix that can be resolved with a new set of replacement window hinges. We can offer a variety of different options, and can even customise the dimensions of the hinges to fit your requirements.

We offer a variety of hinges for upvc and timber windows. They are available in various colors to fit with the existing frames. They also come with all the fixings needed to set them up. We can supply repair screw packs for double-glazed windows that have older style hinges. This allows you to cut the thread back into the frame.

We offer a range of different hinge types, from conventional casement hinges for windows that can be used with a normal or tilt and turn handle, through to fire escape egress hinges that are suitable for use on larger-sized side hung windows. These are designed to be opened fully in the event of a crisis and incorporate an easy-clean position for ease of cleaning. We also carry hinges with restricted-egress that are designed to restrict the opening angle of windows to a maximum of 100mm. This is perfect for households with children.

Squeaky hinges can be an indication that the hinges are wearing out, and this is usually due to the rubbing of metal against. If the noise persists then a small amount of lubricant will help.

The windows that are plumb help to avoid the need for binding, this means that the operating sash of the window is in line with the frame, which ensures that it opens and closes properly. A window that isn't plumb may begin to close and open with difficulty or may get warped over time, causing problems for the seal and appearance of the window.

When buying replacement upvc window hinges be aware that they can be purchased in imperial or sizes in metric. The sizes in metric are more precise but this is not really evident once they are installed. The first corner fixing holes on the track and arm are of a standard size, but the rest could differ in length based on the hardware used originally. We advise that you measure the hole spacings on your existing frame before purchasing any hinges made of upvc to be sure that they are the right size.

Crank

Over time, wear and tear could cause damage to your window handle the lock, crank mechanism or even the handle. This could make it difficult to open and close your windows. It can also impact their security. If you notice that your window is hard to open or close, or you hear a click when you turn the handle, it could be a sign that you need to replace the crank mechanism. If you're unable to secure your window, or the multipoint locks are damaged, it might be worth replacing the crank mechanism as well.

It's easy to replace a window crank with minimal effort. However, it is essential to buy the correct size replacement. You can tell if the replacement has the exact same height of step as the previous one by measuring the distance from the crank arm guide bushing to the notch on the track at the bottom of the frame. You can also determine the spindle length on the handle you currently have to determine the size of a replacement.

The type of window handle you have will determine which kind of crank mechanism you need for your casement or awning windows. Espag handles are equipped with a spindle that is a mental component on the back that is attached to the window frame and controls the window mechanism, while cockspur handles have pegs that are held in place by three or four screws which are fitted into the sash and frame.

Once you've identified the right replacement, it's simple to fit. First, remove any trim mounting screws that are on the casement cover of your window and then carefully lift it off to reveal the insides of your window operator (Photo 1). Remove any rusted trim screws and then compare the new operating lever to the old to make sure they are in line. Then, attach the replacement to the window frame, and replace any screws that were damaged or bent, and then place the casement cover over the mechanism.