• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Patio Doors Repair - How to Fix a Wet Dog and Save Your Dog From Cold, Wet Feet

patio doors repairs doors provide a comfortable and comfortable transition between your outdoor and indoor space. By keeping air inside your home, they will save you cash on cooling or heating costs.

But with time, your sliding glass or French doors may lose their appeal. However, simple repairs can keep them looking and functioning as new.

Weatherstripping

It's 5 am and you're taking your dog out for his morning routine when you step into an emerald-colored pool of water right by your sliding patio doors. You glance around and realize that the rain from last night was able to get through the seals of your patio doors. This isn't going to be an easy task. With a bit of patience and a few simple tools you can fix the problem and save your dog's feet from getting wet and cold.

The key is to replace the weatherstripping which closes the gap between the door and jamb, preventing moisture, pests, and drafts. This will also keep your energy costs down. If you check your doors and windows, you can tell whether the weatherstripping has to be replaced or not.

There are a variety of weatherstripping that you can choose from such as open-cell and felt foam, thermoplastic rubber, and metals like copper or bronze. Each has advantages and disadvantages. Felt and open-cell foam are inexpensive however they tend to be visible and ineffective at blocking airflow. Vinyl is more expensive, but it's durable and resistant to moisture. Rubber is a great choice for areas that are heavily used because it won't wear out as easily.

For installing new weatherstripping, you must first remove the doors from the frame using a screwdriver to loosen the screws that adjust the rollers. Then using a flathead screwdriver unscrew the plugs that keep the weatherstripping in place on the bottom of the frame. Remove the old weatherstripping from the frame and remove any adhesive remnants. Then, cut the new to the correct length, peel back the plastic strip on the other side and attach it to the jamb using a putty knife.

After that, you can reinstall the door and re-adjust the roller screws so that the door is positioned in the track and shuts properly. Then, apply waterproof caulk on the area where the stationary panel is positioned to bypass the sliding door, and where the edge of the stationary panel reaches the frame. This is not a more secure seal than weatherstripping but should last for a while.

Handles and locks

Locks and handles for your patio door are essential to ensure the security of your home. Over time they can get worn or damaged and need to be replaced. In addition, the spindle that connects the exterior and interior handles could also need to be replaced.

To replace a handle on a patio door, remove the previous one first by dislodging any screws that held it in place. After removing the handle, use a level and ensure that the door is straight. If the door is not straight, it could interfere with the lock and cause issues later on.

Close and open the handle a few times after installing it to ensure it's working correctly. If you have any problems ask the manufacturer or a professional in the field for assistance. It is recommended to keep the lock mechanism lubricated by using a silicone-based oil to avoid future issues.

The most popular type of patio door lock repair door lock is a mortise latch. It's typically made of steel and sits inside a pocket carved into the door frame. These locks are typically used on sliding doors made of aluminum and wood. When replacing a mortise lock, it's important to measure a few things before ordering a new one. You will need to be aware of the location of the mounting holes and the position within the keyway lock.

Some patio door handles have an integrated locking mechanism that's integrated into the handle. These handles come with a rectangular key cylinder which is inserted into the handle's keyway. This kind of patio door includes the inside and exterior locks in one piece. This kind of patio door is typically found on sliding aluminum doors.

If your patio door latch isn't fixed it could be because the lock tongue isn't grasping the hasp of the jamb correctly. Another possibility is that the sliding door isn't completely parallel with the jamb's side. Open the door one inch and then position it against the frame. This will reveal if there is a gap between the door jamb and the door. If there is, adjust the rollers on the bottom left or right of the patio door to make it perfectly parallel with the jamb.

Misalignment

As time passes, the door's tracks and rollers can lose their proper alignment. This can cause the door to become stuck or become difficult to move. It could also allow cold air and drafts to infiltrate your home, which could decrease energy efficiency. Fortunately, misalignment can be easy to correct and stop. Applying a silicone-based oil to the rollers and tracks can help your doors move again. It's a good idea do this periodically to keep your doors in peak operating condition.

A damaged or ripped screen can be an issue. It can be a hassle or a danger. It could also stop the doors from closing and opening correctly, which can result in energy loss. In some instances, the torn screen can be replaced, however, in some cases it's necessary to replace the entire door. If you're experiencing a ripped screen, wash it thoroughly and be sure to avoid turning the handles of the door in the wrong way when you open and close the door.

Hinges may loosen as time passes due to heavy use or normal wear. Regularly tightening the screws will aid in resolving this issue and ensure your doors close tightly. This is an easy task that you can do yourself, but if not comfortable doing it, you should consult a professional to ensure your doors are correctly aligned and secure.

It's also a good idea to regularly clean your patio doors tracks and rollers. A simple brushing or vacuuming can remove dirt and dust that might interfere with the smooth operation of your patio doors. You can make use of a specific tool for the most stubborn dirt or corrosion. It is possible to correct misalignment by tightening or inspecting the screws. But, at times, it is necessary to replace the hinges in order to ensure a long-lasting seal.

The alignment and performance of your patio doors could be affected if the frames are warped or sagging. Shifting or warping can occur due to changes in the foundation of your home, but could also be caused due to poor installation or by frequent usage. A professional can fix or replace the frame of your repair patio doors door and ensure it's aligned properly, allowing it to perform at its peak.

Rollers

The sliding patio doors can be an excellent way to let the outdoors in and let in plenty of light, however they require some maintenance to ensure they are moving smoothly. If you need to pull the handle to get the door to move, or it doesn't move as smoothly as it did in the past, it could be the rollers. Over time the lower track can fill with dirt, sand and mud, making it difficult for the rollers to roll over. You can clean it and spray it with a lubricant such as 2Slick to determine if it helps.

If the tracks have been cleaned, but the rollers are still not gliding freely, then it is time to replace them. Replacement rollers are available for your door and track type. They can be found at many hardware stores, however you'll need a partner to help with the removal and installation of the rollers. Before ordering replacements, get an accurate picture of the roller assembly mounted in the door frame, so experts can determine the specific model and type you need. They can also look for distinctive characteristics like dimples, bumps, flared edges and cut-outs that could narrow your the options for replacement.

After replacing the rollers you'll have to reinstall the sliding door back into its frame. This is a heavy door, so you may require assistance. Begin by making sure there aren't any screws securing the track in place on either side of the frame. Also, make sure that they are loose enough to allow the door's bottom to drop into the channel that is on top of the frame. If there is a screen door, remove it from the opening and ensure it's clear of the track and rollers.

After you have installed the new rollers, gently insert the door into the frame. Then, you can gently lower it to make sure it is secure. If your new rollers are adjustable, you can adjust them to give the door a clearance where it needs it.