• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

Whether you're replacing your handles for upvc windows or need to add extra security you can choose the perfect handle for your door. The Upvc handles are simple to install and meet the required 92mm centre distance of multipoint locks.

The backplate's fixing centre as well as the lever/keyhole dimensions are the most important measurements. Compare these measurements with your current marks before making a purchase.

Lever/Pad

Lever pad handles are made up of a lever on one side, and a paddle-shaped handle on the opposite. These are designed to work with key wind locks, however, they can also be fitted to multipoint split spindle door locks (though you will need an additional dual spindle lock case).

Once you have selected the appropriate handle for the doors, the available finishes will be shown in the drop-down menu. Not all styles of handle are available in every finish though and it is recommended to check the sizes and technical drawings for the specific product that you want to make sure that you can get the correct size and fitting.

When you are choosing the new set of lever pad door handles made of upvc, it is crucial to make sure that they correspond to the PZ (distance between the spindle of the handle and the center of the cylinder hole) of your existing multipoint locks, since they have to be in line for the doors to remain locked, either from the inside or outside. The handles we offer are designed to work with a variety of conventional cylinder locks, however you should double-check prior to making a purchase.

You'll need to remove your existing handles and dismantle the lock case if you're upgrading to dual spindle handle levers as this will require an additional split cylinder inline. You can purchase these separately. We have included a technical illustration in the images of each product.

After you have removed the screws holding your existing door handle it is recommended to loosen them and inspect the mechanism to determine what condition it is in. You may need to loosen the screws even more when they aren't tight, and then you can take off the spindle and handle and install your new upvc door handle. Before putting the handle in place it is a good idea to check that it is in the right place. You can do this by placing your finger into the gap between the door frame and the door handle to ensure that it is level.

Lever/Lever

The lever handles on doors are used to operate a multi-point lock using a Euro cylinder. They are found on many upvc double doors as well as aluminium and wooden doors. They are equipped with an inside lever and a paddle on the outside and are generally available in two varieties. Sprung - They have a spring cassette installed within the backplate that helps bring the handle lever into an upright position. Non-sprung - these do not have a spring mechanism and will need to be manually pulled to bring the replace window handle lever to the horizontal position.

To repair the door handle lever that is sliding it is necessary to locate the detent access pin or hole. It's usually a small hole or protruding ring or rectangular located on the handle base plate. Once you have located the detent access hole or pin, you are able to remove it using a screwdriver.

When the handle is in a horizontal position, you can re-install the screws and tighten them until the handle remains fixed to the base plate. Consider applying a threadlocking product to the screw threads in order to increase grip and prevent the threads from becoming loose over time.

Drooping lever handles on door handles could be the result of many factors. The most frequent reason is that the fixings have been over tightened, and are putting pressure on the lever bearing and causing it to pull against the door's face. It could also be that the levers may not have been operated at the correct angle, which stretches the latch mechanism and prevents it from fully springing into motion.

A common cause of a sprung lever not working properly is that the spring is not being in the right position on the backplate. The most effective way to determine this is to operate the handle and see if it returns to the horizontal position.

If your door handles are loose, it is essential to spot the issue fast, as it could cause excessive wear on the screws, and even to the handle falling off of the base plate. You should also tighten any loose screws regularly to prevent them from becoming looser.

Lever/Snib

These upvc door handles are also referred to as handle sets with a 'Snib' and have a snib lever towards the top of the lever that you can push down to lock your door in the event that you don't use the dummy lock. They are usually fitted with a Fullex 68PZ (that's 68mm between the spindle centre and lever or the lock centre) door lock. We also stock a variety of other door handles with 68PZ from various manufacturers, including Ferco and Fab & Fix.

You can upgrade your home by changing the handles on your doors whether you are replacing the handles for double glazed doors on your existing ones or installing new ones on doors you've built. There are many styles of upvc door handle available with traditional levers on backplates, straight or curved short latch and dummy knob handles for multi point locks, which are ideal for French doors.

Lever on backplate handles are often rectangular, but there are also oval or circular-shaped versions that are referred to as rose door handles. These types of door handles come with the knob or lever on a backplate, which sits behind the knob or lever and is often referred to as a rosette, although some back plates can be removed to be concealed for fixing.

There's a wide selection of chrome and colored finishes available for these handles that complement your door and other hardware, like hinges, knobs, bolts and so on. Some handles come with grub screws, which aid in the secure attachment of the knob or lever to the spindle. Other handles come with bathroom spindles that can be used to control bathroom locks and incorporate a thumbturn turn and release mechanism, which is ideal to use on doors for bathrooms.

Mortise

The tubular latch is the most likely to be the culprit when your door handle made of uPVC is slammed shut. This can be caused by a number of things however the most frequent is a lack of lubrication in the latch plate. It is possible to fix this issue by opening the door and spraying lubricant onto the handle and locking. It could also be that the latch is loose from the backplate. This is a more complex issue that requires the help of an expert.

A multipoint door handle is a great solution to the problem of a stuck door handle. These handles are mounted on the door's faceplate and are operated with an actuated thumb turn knob or key which activates a cam that locks the deadbolt. The handles are available in a number of sizes that will fit various kinds of uPVC doors. They also come in a variety of attractive finishes that match existing hardware. The handles are available via the internet or at the local locksmith. They are easy to install and come with clear instructions.

You will need to know the PZ size of your cylinder in order to choose the correct replacement upvc door handle handle set. This is the distance in millimetres between the inner edge of the door frame and the center of the handle hole. You'll also need the type of lock on your door, regardless of whether it's a mortise or hook lock. The most efficient way to locate the correct handle after you have the measurements is to use the brand filter on the website. This will narrow down your options and you can then select the correct size from the list.

A typical set of handles for internal bifold doors includes the handle unit and a pair of different length screws, drill guides and installation instructions. Smarter versions, like the Igloohome Smart Mortise 2+ include a mortice lock complete with a keypad. These are more sophisticated devices that are suited to professionals or highly skilled DIYers. Some handle sets come with many accessories, such as weather strips that can be used to enhance appearance of the door.