• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The euro door handles handles that you have in your home are an important element of your interior design. A new handle can transform your home's decor and bring your decor up-to-date.

Over time the knobs on your door could become stiff or even break. These are indications that it's time to change them. This guide will help you select the correct door handle Replacement Door Handles for your home.

Door Knobs

Door handles can enhance the look of your home, while making it easier for people to open and close doors. They are available in a variety of finishes, colors and styles to complement your decor. If yours is beginning to show signs or need an upgrade, you can change them in just a few easy steps.

The first thing you have to do is locate the shaft or spindle through the knob's attachment to the door. Some have a tiny hole that you can put an incredibly small screwdriver to loosen the set screws holding the knob in place. Some have a slot or hole where can be used with the flathead screwdriver on a spring-activated pin, also known as a detent. When you press the pin and the latch mechanism opens, it releases and lets you pull or push the knob.

Once you have the spindle or shaft in your hands Remove the knob and replace it. Check that the latch functions properly before tightening the new set screws.

Once you've replaced the knob, hold the rod for latching over the door's hole and lock it in place with the rod mechanism on the second knob. Make sure that the holes are in alignment, then tighten the latch plate screws.

Some people prefer an brushed or smooth metal finish for their door hardware, giving their home a sleek and contemporary look. It will complement their furniture. Others prefer a more rustic style which is great for spaces that are reminiscent of farmhouse. If you have a member of your family with mobility issues, you might prefer an rim or lever lock that requires less pressure to operate.

While aesthetics are traditionally the primary consideration for door handle design, other factors are becoming more important too. Accessibility and infection control have been major considerations in the creation of new designs for uvpc window handles. For instance, some can be operated using the arm of a person.

Latch

The latch that opens your door can wear out from the wear and tear of use. It is simple to change the latch on your door handle. This will make a big difference in how it opens and closes.

Depending on the kind of knob you have, the latch may be part of the knob itself, or it could be an independent piece attached to the victorian door handle. In either scenario, the same procedure for removing and reinstalling will apply. Removing the old latch of place is fairly easy particularly if your door handle is equipped with what's called a "magic button". The tiny pressure-slot, which is located on the side knob, is the one you'll have to press to remove the latch of the handle.

If your handle doesn't have this button the first step is to take off any cover plates that rest over the latch plate. They are typically circular or rectangular and can be removed using a screwdriver to pull them off of the handle. Some have a slot in which you can put your screwdriver, while others simply snap off.

The next step is to remove the two machine screws holding the latch and inner plate to the door handle. These are the screws that are shorter with a sharp point and you'll need to keep these in a safe location to reuse them in subsequent steps. Once the screws are removed, you can take the latch plate as well as the mechanism from the hole and put it aside.

Then you can begin to install the new latch. Place the latch plate in the door hole and secure it using the hardware supplied. Make sure the square pin on the inside of the latch is pointing towards the latching mechanism inside the handle and that it is lined up with the other screw chambers inside the door handle. Then, push the outside latch plate onto the handle and secure it using the screws supplied.

Strike Plate

One of the most common reasons to replace the door handle is because it is loose or isn't locking properly. This is usually caused by malfunctioning parts of the latching system, for example a striking plate that's either too small or has moved upwards or downward on the doorjamb with time. This simple project will allow you to replace your existing strike plate with a longer, new one that will provide better security and ensure that your door stays shut.

To determine if the issue is due to the strike plate, apply some lipstick or similar marking material to the latch bolt. Close the door, then try to latch it. If the mark is located below the strike plate hole it means that the door isn't latching because the strike plate is too small. If the mark is higher than the strike plate hole, it's likely that the strike plate has been moved up or down on the doorjamb.

It is possible to screw the new strikeplate into the existing one using the screws included with it, based on your door. You may have to drill holes first and then chisel some wood out to ensure a perfect fit. If this is the case, be careful not to cut too much or you may cause damage to the integrity of your doorjamb.

You could also try installing a new strike plate, which provides the lock with a more secure grip on the door and requires more force to open it. Typically, it requires two longer screws that secure the strike plate to the frame of the door handle replacements. You'll have to remove the old strike plate before drilling and chiseling the wood to make room for the new one.

This hard-to find strike plate is made of solid brass and comes with a thick, heavy-duty. It's designed to be used on antique rim locks. This kit comes with wood screws and machine screws so you can choose the right hardware for your requirements. Be aware that wood screws have a sharp tip, whereas the machine ones are more blunt.