• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Reasons Your Fiat Remote Key Replacement 500 Key Fob Won't Work

A key fob for the fiat remote key replacement 500 makes it easy to open doors and start your car. There are many reasons why the key fob might stop working. These include a dead battery or damaged receiver module, water damage problems, and interference.

This listing is for an NEW replacement fiat 500 replacement key uk Flip Key Remote - similar to the Ilco brand that must be programmed professionally by a local automotive locksmith (click here for Locksmith Search). This remote includes lock, unlock and trunk buttons.

Dead Coin Battery

The most frequent reason that your 500 key fob doesn't function is an inactive battery. Modern key fobs only have a limited range of operation and must be within just a few inches of the vehicle in order to function. If you're far from your vehicle and you hit the keyfob, it will not respond, and display the message "Key Fob Not Detected".

If this occurs then replace the battery for your coin-cell (Part Number CR2032) with a new battery from a reputable brand like Panasonic Duracell or Energizer. You can usually find them at your local hardware store, or online.

After you've replaced the battery in the coin cell You can test it by standing near your spare fiat 500 key 500 and pressing the buttons. The parking lights should light up and the key fob should operate the lock and unlock switches.

If your fob's key isn't working even after replacing the battery, it may be water damage that is preventing it from connecting to the module in your vehicle. Water damage can occur in a variety of ways, ranging from the slightest splash to submerging the fob salt water at the beach. If you suspect that your fob was exposed to water, put it in a rice bag to draw out the moisture. If this doesn't work, your fob may require reprogramming by a professional locksmith or dealer.

Water Damage

Water damage can occur when you submerge the fob in the ocean or wash it in a washing machine. Saltwater can cause the circuit board to short and eventually fail. It's not good to submerge the fob in water however, don't give it up if you accidentally drop it in water or fail to remove it from your pocket.

Take the battery off first. Clean the electronic chip using isopropyl alcohol or another similar product and dry it thoroughly before replacing the battery. Check the fob again to verify if it's working. If the key does not function, it may have to be reprogrammed. This is usually done by an auto locksmith or dealer.

If your key is a bit older and has not been programmed to work with your vehicle then you'll need to replace it completely. A professional locksmith for cars can do this job. The locksmith will have to cut the key to match the ignition in your vehicle. The locksmith also needs to program your fob into the car's system. This is a cost-effective and quick process that could be completed on the same day.

Receiver Module Issues

Your 500 key fob might be inoperable because it's out of range. The remote usually has a range of 30 feet or less and if it's far from your vehicle, it won't respond to your commands. This can easily be resolved by moving closer to your vehicle until it begins responding.

If your fob doesn't work after replacing the battery inside the coin, which is also called a "button", "watch" or "button" It may be due to a malfunction on the internal circuit board. In most cases, reprogramming the fob will solve the issue. There are instructions on how to get fiat key code to do this for most vehicles by searching YouTube or reading the owner's manual.

It is possible to replace the metal retaining clips that hold the coin battery. If they loose tension, it could hinder the battery from sitting properly and could cause the remote to malfunction.

In rare instances, the fob may be out of sync with your vehicle because of software or hardware problems. This could be a huge problem, but you can usually resolve this issue by visiting a local dealer or auto locksmith to reprogram your fob for you. In some instances, the software may also require reinstallation into your body control modules.

Interference

In addition to a dead battery on a coin the key fob could not be receiving or transmitting the signal due to interference. This could happen if the key fob is near a radio transmitter (cell phones, radar detectors) or any other source of electromagnetic radiation. The key fob may not work because of a problem with the buttons water damage or damage to the internal chips.

If the key fob stopped working one day out of the blue, or after trying every option at home to resolve it e.g. It could be a defective 500 receiver module after you've tried replacing the battery, reprogramming it, or using a spare key for fiat 500 key fob. The receiver module is situated under the dash and is able to pick up the radio frequency signals from the key fob. It transforms the signals into electronic commands which are then read by the vehicle.

Fortunately, there's an easy method of resetting every single system on board in your 500 keys, including the key fob. Disconnect the battery for 15 minutes by taking off first the negative cable and then the positive cable. Then reconnect the battery. This will remove any remaining electricity and restart the car's computers, which can help you get your key fob working again. If the problem persists you should seek out an expert technician. They will be able diagnose the exact cause of any issues.