• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to repair ignition lock cylinder an Ignition Lock Cylinder

If your car ignition switch replacement's key won't turn or turn, it's time to replace the ignition lock cylinder. The lock cylinder is a tumbler made of mechanical that your key can slide into, as opposed to the switch, which is an electrical part of the ignition system.

Over time over time, these "wafer" tumblers wear out or break. WD-40 and graphite can temporarily solve the problem, but replacing the tumblers is the only way to fix it.

Removal of the steering column

Modern cars do not use steering column locks. Instead, they use a key that is used to start the vehicle by pressing and turning the switch on the dash panel. This newer system is much simpler and more effective than the traditional lock cylinder method. However, there are older cars that still use the traditional ignition lock cylinder. If this part fails, you might require replacing it in order to start the vehicle. This is a task that should be left to experts.

Using a screwdriver, remove the screws that hold the trim panels covering the lower and upper parts of the steering column. This will allow you access to the area around your steering column.

On the side of the steering column that is closest to the driver, you will find an Allen head bolt that holds the wiper/signal assembly in place. Unscrew this bolt and place it aside. Depending on the year of your vehicle, you may find three or four small screws with flat heads that keep the plastic on top of the turn-signal switch in place. Remove these screws and set them aside.

To access the lock cylinder you will have to take off the wiper/signal unit. This requires the use of a specially designed tool or to do it using an object of metal such as a cold chisel. Locksmiths can also utilize an instrument to remove bolts.

If you can't insert the key into the ignition switch the lock cylinder could be stuck. You can call an locksmith or insert the key into the ignition switch and then move it to the ACC to release the pin of the lock cylinder.

A locksmith can use a shear cylinder removal tool or they can cut the pin off the lock cylinder using a torch and then shave it to remove it from the assembly. They will be able to change the cylinder's key to match your existing keys and save you the cost of a new ignition cylinder.

Replace the Ignition Cylinder

The ignition Cylinder is the mechanical cylinder that houses and locks your car's key. The cylinder fits the key and "reads" anti-theft code to permit or block the start of your vehicle. The cylinder wears down over time. It could also break or get bent. In this case, you will need to replace the cylinder to get your car ignition replacement started.

Signs of a damaged or worn cylinder can be seen in problems with turning your key, or with the ignition switch not moving into the ACC or RUN position, or with a warning light appearing on the dash. If you have an extra key, use it in the lock. You could try using some WD-40 or graphite to tweak the cylinder but this only works for a short period of period of time.

If you have a brand new key, replace the ignition cylinder and follow the instructions above to install it. When installing the new ignition cylinder make sure it is properly seated in the steering column tube flange and is correctly aligned with the keyway on the steering column shroud. Consult your car's manual or an expert to make sure that the cylinder is aligned correctly.

Once the cylinder is installed and the key is turned to the ACC or RUN position. You should hear a click confirm that the ignition switch is completely seated into the cylinder. If your vehicle is equipped with an anti-theft device, you will have to go through the anti-theft relearn procedure for the new ignition cylinder in order to program it to your key.

Some experts recommend replacing the ignition cylinder since it is typically required to shut off the airbag in the steering column in order to access the cylinder. The replacement will also likely require removing the steering wheel and the ignition covers. For these reasons, this is a task best left to a skilled mechanic. They'll be able to remove the cover for the steering column and then properly install a new ignition lock cylinder into your vehicle. They'll also be able to ensure the ignition lock cylinder has been programmed with your key and that it starts properly when you insert it.

Installing the Ignition Cylinder

Although ignition lock cylinders have been less significant in modern vehicles because of remote start and push-tostart systems older cars still make use of them. If you have trouble getting your car started or the ignition switch is stuck it could be due to a defective ignition cylinder. Luckily, it's relatively easy to replace your vehicle's ignition lock cylinder and repair the issue.

The ignition cylinder is the mechanical portion of the system that slides into the ignition switch in your car and provides power to the rest of the engine. The ignition switch and the ignition cylinder are two distinct components. The switch is an electrical device that connects with your car ignition key replacement's computer to transmit signals to turn on the engine when you turn the ignition key.

The pins on cylinders for ignition locks move up and down, permitting your key to move and rotate within the cylinder. Every movement of the key and cylinder creates friction, which keeps the key in its place. However, as time passes the wafer tumblers will wear out. When the tumblers wear down, the key will not be able slide into the cylinder or rotate it.

A worn-out ignition cylinder is usually the first sign of trouble in most vehicles. The key could also get stuck and be difficult to insert into or remove from the ignition lock cylinder. These are indicators that you need to replace your ignition lock cylinder as soon as possible.

Replacing your ignition cylinder is not difficult, but it's a job that should be handled by a skilled do-it-yourselfer only if you're able to follow the correct procedure for your specific brand and model of vehicle. You can complete the task quickly and correctly by using a complete repair manual for your vehicle. If you're not comfortable installing the ignition cylinder on your own make one of our ASE certified mobile mechanics do the repair ignition Lock cylinder for you at a time and place that's convenient for you.

Testing the Ignition Cylinder

The ignition lock cylinder, also referred to as the ignition lock cylinder is a mechanical component that is fitted to your key to allow it to turn and start your vehicle. It is inserted into the ignition switch, which secures the ignition, and reads the anti-theft code to authorize key turning. The cylinder for the ignition lock will wear out and eventually fail. This can cause issues with your vehicle's power or make it difficult to remove and insert keys.

The most common signs that a car's lock cylinder is about go bad include difficulty starting your vehicle or finding places where the key gets stuck when you attempt to turn it. These are usually an indication that the cylinder is in need of be replaced. In some instances, you might even notice an indicator light on your dashboard that signals an impending failure.

As the cylinder age, it can become damaged due to corrosion or wear and wear and. This can cause the pins and tumblers to wear out, damage or break, preventing your car ignition key replacement's ignition from unlocking. In certain instances the ignition may work if you jostle it in different directions but this could be a indication that something is wrong.

You can test the cylinder of your ignition to determine whether it's worn-out or if the key has been bent or damaged. You can test with a multimeter if there's voltage between the red wire connection of the module and the battery terminal of the ignition coil. If you are unable to detect any voltage or a switch, the module will most likely require replacement.

It's best to hire a professional mechanic to replace the ignition cylinder, as it could cost between $200 and $300. The process is made more complicated by the fact that you may need to remove other components to access the cylinder for ignition, such as the steering column. The process of replacing it could require you to deactivate the airbag system and reprogram your key in order to work with the new ignition cylinder. This can be done at an authorized dealer however, you can also learn how to do it yourself with the right tools and instructions.