• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

best coffee bean grinders Conical Burr coffee grinders makers Grinders

Grinding your own coffee beans is a great method to enhance your morning cup. There are a variety of grinders coffee beans.

This OXO grinder utilizes conical burrs that create an excellent grind for drip, French press and espresso. Hardcore coffee geeks may want more precision from this grinder, but it's a great option for those who are just beginning.

OXO Brew

If you're into making your own coffee at home, you are aware that it needs a quality grinder to produce the most flavorful coffee. But a quality burr grinder can cost upwards of $200, which may be prohibitive for someone who isn't certain if they'll be using it frequently or not. The OXO Brew is an excellent choice for anyone looking to enjoy freshly-ground coffee without having to spend hundreds of pounds.

The design of the OXO Brew isn't flashy, but it appears sturdy and expensive. The stainless steel coffee grinder electric, helpful hints, steel body has a permanent water tank in the back and an insulated thermal carafe in the front. The tanks and carafe have been shaped so that the body can be fit into smaller kitchens. The controls are hidden beneath the carafe, which reduces the amount of clutter. There is also a light to let you know when it is heating or making.

Oxo consistently brewed well during our tests. The temperature of the water was within a small range (197.4 F to 205.0 F) for the entire test according to thermocouples located in the grounds basket. The brewing time was very close to the Specialty Coffee Association's recommended time for a high-quality drip.

Another plus for the OXO Brew is that it has a single-serve function that allows you to brew the coffee directly into the mug. This feature isn't present on other models with a higher price. It can be an advantage for those who wish to make individual servings of their coffee, but don't want the hassle of making an entire carafe.

The only drawback to the OXO is that it has no clock or automated start time. This can be a problem when you are working on a tight timeframe. Additionally the water tank can be tricky to remove due to its lid that must be slid off to access the reservoir. It does have a built-in descaler, which assists in preventing mineral deposits from building up within the machine.

Baratza Encore ESP

If you're a coffee enthusiast looking for the best burr grinder the Baratza Encore is the best choice. This version of the classic Encore has been re-engineered with improvements that allow it to be more compatible with a wider range of brewing techniques and provide more flexibility than ever before. It's designed for beginner home baristas as well as anyone who wants to keep their options for brewing open with a single grinder. It has a stepped grind adjustment and simple controls for novice baristas and also marked and notched settings to ensure consistency. The M2 burrs provide uniform grinding, and the hopper comes with a quick release feature that makes cleaning easy.

The ESP employs the same high-torque gear reduction DC motor as the original Encore, but it operates at lower speeds to lessen heat buildup and static charge during the operation. It's also quieter than classic Encore and comes with a new plates made of metal that improves stability and burr consistency. It is equipped with conical burrs that measure 40 millimeters similar to those that are found in the more expensive Virtuoso plus. This helps to get a better size of grind distribution and more consistent shots.

Each step of the ESP's grind adjustment is 9 microns, which provides high resolution when dialing in espresso and finer grinding for pour over. The new dosing cups can be used with both 54 and 58mm portafilters. This makes it easier to use for manual dosing. The grinder can also be used with a traditional grounds bin for those who prefer an hopper-based workflow.

The ESP's inconsistent performance during tests of consistency is a problem, but it still performs better in comparison to other grinders at this price. The stepped settings are too inconsistent, making it difficult to locate the right setting for your particular brewing process. However, the ESP is ideal for many brewing methods and offers an amazing value for its versatility.

The Encore ESP is also a bit more expensive than some of the other models on this list, but it's worth the extra expense for its amazing flexibility. It can grind for filter and espresso coffee brews. The shims that come with it will optimize its performance for Pour Over making.

Baratza DF64

The Baratza DF64 is a good grinder that works well with espresso and pour-over brewing. The burrs can be upgraded to enhance performance and the hopper is sufficient to accommodate a range of grind sizes. The DF64 is also simple to use and maintain, with few moving parts. It's a great choice to anyone who is seeking a top-quality grinder at a low cost.

The DF64 Gen 2 is a major improvement over the initial model and should be hard to beat by other grinders that are priced similarly. The new model is more attractive to the eye. It has a simple rounded-flat base that can hold up to 20 grams of beans at a time and a single dose cradle. It also has a bellows made of rubber that is able to push air through the grinder as you take the dose, to eliminate the excess grinds and decrease retention.

One of the major problems with the original DF64 was popcorning, which is when coffee beans bounce upward out of the burrs instead of grinding down. This is a common problem with hopper-based grinders that can affect the consistency of your grind. The new DF64 has a much-improved anti-popcorning system that eliminates this problem.

Other issues with the DF64 included a poor quality build, a loose design that caused gaps around the edges of the hopper, a heavyweight, a mandatory use of bellows, regular alignment challenges, a plastic adjust collar that mis-threaded easily, vinyl wrap instead of powder coating, and the all-but-mandatory need for two aftermarket upgrades (anti-popcorning, declumper). The DF64 Gen 2 addresses these issues and many more.

The DF64 has a powerful 250W motor that spins the burrs at about 1,400 RPM. This is a little faster than the Encore ESP, but it’s still slower than other popular burr grinders like the Mahlkönig EK43. The DF64 is also less noisy than the Encore ESP, making it easier to work with in a busy cafe environment.

The DF64 has an easy-to-read, step-by-step adjustment system that allows you to fine-tune your grind size for different brewing methods. It also comes with a wide selection of burrs, which makes it possible to experiment and find the perfect grind for your particular coffee bean. The DF64 also has a convenient dosing system, which allows you to direct the ground coffee directly into your portafilter or mug.
Fellow Ode

A popular maker of home coffee equipment, Fellow makes some seriously aesthetically appealing gear. Their kettles, French presses, and other home coffee brewing machines have an elegant and modern matte finish that suits any kitchen aesthetic. With this in mind, it should be no surprise that their grinders look equally as good. The Ode is a sleek and compact grinder with a number of easy-to-use features designed for precise, single-dose brewing.

The Ode is unique among coffee grinders because it uses flat burrs, rather than conical ones. Usually, you only see flat burrs on professional or commercial grinders due to their ability to reduce grind time and heat generation and improve grind particle consistency. The 64mm flat burrs in the Ode also give it a much smoother grind than you would find in a typical home appliance grinder. And they are designed with single-dosing in mind, meaning that the grinder shuts off as soon as the hopper is empty. This helps to prevent over-grinding, which can rob your brews of flavor and aroma.

The hopper itself holds 100 grams, which is enough for one large pour-over or two small cups of espresso. The Ode has a variety of other neat features, including a built-in scale and a cool grind size chart that is mapped out on the underside of the lid. This shows the brewing methods that each setting is most suitable for, with pour-over and cold brews on the fine end of the range, and French press on the coarse end.

Another great feature of the Ode is that it has a quiet, almost purr-like sound during operation and is very fast. The grinder has a high-force spring that knocks excess ground beans and chaff into the catch, which helps to reduce grind retention and make clean-up a breeze. It’s also very easy to disassemble and is compatible with coffee tablet cleaners.

Despite some minor hiccups in the initial launch, the Ode is still a top contender for those looking for an excellent and aesthetically pleasing conical burr grinder. Fortunately, the company is committed to improving the product and recently released the Gen 2 version, which addresses some of the issues with the original. However, for those who want a better-suited grinder for espresso, the Baratza DF64 is an excellent alternative that is both visually and functionally superior to the Fellow Ode.