• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

Whether you're replacing your handles or need to add more security, you can find the right handle for your door. Upvc handles are simple to fit and comply with the required 92mm centres of multipoint locks.

The backplate's fixing centre as well as the lever/keyhole dimensions are the most important measurements. Make sure you compare these to your current measurements prior to ordering.

Lever/Pad

Lever pad bifold door handles handles consist of a lever handle on one side and a paddle-shaped handle on the other. These are designed for use with key wind locks. However, they can be fitted to multipoint split spindle door locks.

Our range of upvc handle lever pads are available in a range of finishes. They will be listed in the drop-down list once you have found the right handle for your doors. Not all styles of handles are available in every finish and you should always check the sizes and technical drawings for the particular product you're looking for to ensure that you can get the correct size and fitting.

It is important that when selecting a new set of Upvc lever pad handles, they match the PZ (distance from the handle spindle to the centre of the hole of the cylinder) of your multipoint door locks. This is because these are required to be aligned for the doors to stay locked, no matter if you're viewing them from the inside or outside. Our handles are designed to fit a wide range of standard cylinders, however it is always worth double-checking before purchasing.

You'll need to take off the handles on your current handle and remove the lock case if you are upgrading to dual spindle handle levers as this will require a split inline cylinder. You can purchase these separately. We have included a technical diagram in the images of each product.

It is recommended to loosen the screws holding the door handle you have and then inspect the mechanism. You may have to loosen the screws a bit more when they aren't tight, and then you can remove the old spindle and handle and install your new upvc door handle. Before screwing the handle into position, it is recommended to make sure it is in the proper position, and you can do this by placing your finger in the gap between the frame of the door and the door handle to make sure it is in a level position.

Lever/Lever

The lever door handles are used to operate a multi-point lock using the Euro cylinder. They are found on a variety of double upvc doors as well as some wooden and aluminium doors. They are equipped with a lever inside and a paddle on the outside and are generally available in two types. Sprung - These have an internal spring cassette within the backplate to help bring the handle lever to a horizontal position. Non-sprung - These do not have a spring mechanism and must be manually pulled to raise the handle lever to the horizontal position.

To fix the door handle of a lever that is sagging, you will need to locate the detent access hole or pin, which is typically a small rectangle or round shape hole or protruding pin situated on one side of the handle base plate. Once located you can loosen the set screw using the help of a screwdriver, and then remove it to allow the lever to return to the horizontal position.

After the handle is set horizontally, it is possible to reinstall the screws. Close them to ensure that the handle stays connected to the base plate. You should also consider applying a threadlocking adhesive to the threads of the screw to increase the grip and prevent them from loosing over time.

Lever door handles that droop can be caused by many factors. The most common reason is that the fixings aren't tight, causing the lever bearing to pull against the door. It could also be that the levers have not been operated at a right angle, which compresses the latch mechanism and prevents it from fully springing into motion.

Another common cause is that the lever that is sprung is not functioning properly and this is usually due to the sprung not being in the correct position within the backplate. To determine whether the handle has returned to horizontal, simply operate it.

It is essential to repair any door handles that are damaged immediately. This could lead to excessive wear on the screws and the handle could fall off the base plate. It is recommended to tighten all loose screws regularly in order to prevent them from becoming loose.

Lever/Snib

These upvc door handles are also known as handle sets with a 'Snib' and feature a snib button on the top of the lever that you can press down to lock your door in the event that you don't use an Dummy lock. These handles are fitted with a Fullex lock 68PZ. (68mm between the spindle and the lock centre). We also carry a selection of other 68PZ door handles from manufacturers such as Ferco and Fab & Fix.

You can make your home more modern by changing the door handles, whether you are replacing existing handles or installing new ones on doors that you've constructed. There are various styles available for door handles made of upvc, including the classic lever on backplate. Other choices include straight or curved short latches, and knobs that resemble dummy knobs to lock multi-points. These are perfect for French doors.

Rose door handles are circular or oval-shaped versions of lever on backplate uvpc window handles (Stokes-mcmahan.federatedjournals.com). These handles are identified by a lever or a knob that is attached to the backplate. The backplate can be removed to allow for concealed fixing.

The handles are available in various finishes, including chrome and coloured finishes to match your door and other hardware such as knobs, hinges and bolts. Some handles have a grub screw to attach the lever or knob firmly to the spindle. Some handles are equipped with bathroom spindles that can be used to make bathroom locks. They also have a thumbturn release mechanism and can be used on doors for bathrooms.

Mortise

If your front door's uPVC handle is stuck in the open position, the problem is most likely to be related to the tubular latch. This could be due to many things however the most frequent is the lack of lubrication on the latch plate. This can be fixed quite easily by simply opening the door and spraying lubricant over the handle and lock. It could also be that the latch has slipped away from the backplate. This is a more complex issue that requires an expert.

A multipoint handle is the best solution for stuck door handles. The handles and hinges are positioned through the faceplate, and are operated by either a thumb turn or key knob which activates the cam that locks the deadbolt. The handles come in different sizes to suit different types of uPVC door, and come in various attractive finishes that complement existing hardware. The handles can be bought online or through a local locksmith and are simple to install, with clear instructions.

You will have to know your PZ size of your cylinder in order to choose the correct replacement handle set. This is the distance in millimetres that lies between the outer edge of the frame of the door and the centre of the handle hole. You will also need the type of lock that is installed on your door, regardless of whether it's a mortise or hook lock. Once you have these measurements, the most efficient way to find the correct handles is to use the filter by brand option on the website. This will narrow down your options, and you will then choose the right size from there.

A typical set of handles includes the handle with a pair of various length screws, drill guides and installation instructions. The smart versions, such as the Igloohome Smart Mortise 2+ comes with an entire mortice lock that has built-in keypad. These are more complicated devices that are for professional installers or highly skilled DIYers. Some handle sets have an array of additional accessories, such as weather strips that can be used to enhance the look of the door.